Rabbits and minks use water dispensers

Rabbit water dispenser

Common types:

Nipple type: Rabbits can drink water by touching the felling pole within a 360 ° range, with strong adaptability. It can be used by otter rabbits, long haired rabbits, meat rabbits, as well as adult rabbits and young rabbits. Stainless steel material is more wear-resistant than copper (based on actual reports) and has a longer service life. The design of the water outlet can prevent water leakage. For example, when the lid of the kettle is tightened and reaches a vacuum state, the water output decreases, and rabbits can drink as much as they lick, avoiding waste

Duck billed type: Rabbits need to bite down on the straw hidden in their nipples to get water out. It is mostly used for long haired rabbits, but nipple type water dispensers can also be used for long haired rabbits after adjusting their installation position, which is not easy to contaminate rabbit hair

Ball bearing model: clean and hygienic, suitable for young rabbits and portable scenes, but with small capacity, not very good for cervical spine, and prone to water leakage

Hanging bowl style: It has a large drinking capacity and is suitable for adult rabbits, but it is easy to get dirty and difficult to clean

Basin style: With a large capacity and hygienic design, it is suitable for long-term business trips and is inconvenient to clean

Precautions for use:

Confirm that the drinking water is fresh and clean, and do not use contaminated or chlorine containing tap water. Replace it at least once a day

Avoid excessive water temperature in summer, and ensure that the water does not freeze in winter to maintain a suitable drinking temperature

Regularly check the water level and leakage situation to prevent leakage or blockage, and confirm that the rabbit can drink water smoothly. Choose a suitable water dispenser based on the size of the rabbit to avoid wetting the chin or causing inconvenience

For nipple type water dispensers, if installed on the ceiling, they must be perpendicular to the ground; If installed on the rear net, it is required to have a certain angle with the rear net, preferably around 85 degrees. It cannot be directly connected to the high-pressure water pipe and needs to be depressurized. If a nipple is found to be leaking or dripping water, it should be repaired and replaced in a timely manner; If moss grows in the water supply pipe, it should be cleaned and disinfected in a timely manner; If scale is found in the bucket, it should be removed in a timely manner

Mink water dispenser

Common types: Automatic water dispensers are commonly used, such as copper head water dispensers, plastic steel anti bite feeders, etc., which are suitable for mink's licking habits.

. The water dispenser is equipped with a leak proof sealing installation assembly, which is fitted with an elastic sealing ring at the upper end for good leak prevention effect

Precautions for use:

Drinking water has a significant impact on the growth and development of young minks. It is necessary to protect sufficient drinking water based on clinical effects, especially in summer, by providing sufficient clean drinking water and bathing water

The water dispenser should be leak proof and easy to lick to avoid difficulty in drinking water

Regularly clean the water dispenser to prevent the growth of substances, and replace the clean water every day